f-a-q

Having some experience is helpful but not essential. 

If you are curious and motivated you will have no trouble. Our kits are designed to be intuitive and include detailed step-by-step instructions.

Our designs are generated using parametric principles - this means we can adjust the dimensions of the kit components to suit specific van shapes, sizes and user requirements. 

If you are using a van that we have not designed for in the past, you will need to supply dimensions and photographs of your van when we conduct our consultation so we can provide you an accurate drawing and estimate of production costs. There may also be some additional trimming needed during installation to make parts fit snuggly against the interior of the van body.

If possible, it is preferred that you bring the van to us so we may complete the measurements and do a 3D scan of the van interior.

In short, YES. We WILL need to charge for design time and there will be more engagement required to confirm the design outlined here. There may also be some cost changes to reflect the modifications to the design.

The instructions will also be based on the base model and may not accurately 

Yes. We WILL need to charge for design time and there will be more process required to confirm the design.  Please arrange a consultation via the 'contact' page here

Yes we can, learn more here. We will need to charge additional fees for this. Our priority is to make the kit easy to build to save you money and also create a rewarding d.i.y. experience, but we understand if you would prefer us to handle it.

After fabrication, we would need your van for approximately two weeks to complete installation. 

You will need a range of typical woodworking tools. These include:

• Battery drill

• Set of twist drills 3mm ⇒ 10mm

• Square driver (or phillips if using phillips screws)

• Jigsaw/ saw (to adjust edge of partitions for better fit around curved faces).

• Socket-set or adjustable spanner

• Stanley knife

Optional tools:

• Kreg Mini pocket holer (optional preferred)

• Trimmer/palm router (optional preferred)

• Rubber mallet

• Tape measure

• Pencil

It is possible to rent a bag of tools required to complete the kit. There is a small rental fee and a bond required. Please inquire if you would like to consider this option. 

It depends somewhat on the kit your purchased, your experience and motivation.

For a typically kit, you should be able to complete a typically assembly and installation in a weekend. Sanding and painting can take another weekend.

From payment, the kit will take 2 weeks for one of our existing designs. This time includes purchasing and delivery of raw materials to our workshop, fabrication and kit preparation. 

Additional time will be required for custom or new designs.

Enquire to confirm current lead times.

Inclusions:

• The base kit includes all timber panels cut for assembly into the kit. 

• All cabinet hardware including screws, hinges, fixings drawer slides etc. 

Exclusions:

• Insulation and paneling for floors, walls and ceiling are excluded.

  • The van should be prepared to your desired level ahead of installation of the kit.

  • Alternatively, cabinets can be fitted and removed later to complete the walls and ceiling.

  • NB: Floor should be installed to facilitate securing of the cabinets to avoid movement and retain them in the case of an accident.

• Plumbing and electrical - No hoses, tanks or electrical wiring provided - guidance for these elements and some suggestions on suitable installations and vendors in appendix (under development).

• Soft furnishings - Mattresses, cushions and curtains are not provided - as above, guidance is provided in the appendix.

• Accessories and appliances 

• No toilet sanitary or devices to meet self containment requirements. 

• safety devices etc.

3rd party suppliers and where to buy

We have a schedule of parts and suggested components from 3rd party suppliers to complete installation of all above items which can be provided on request.